You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Magnum Blog

  • How to Clean Your Desert Combat Boots: A Step-by-Step Guide

    desert bootsYour choice of footwear plays a huge role in how well you're able to do your job. If you're serving our country, your military combat boots need to protect your feet and help you meet the demands of your position. When desert boots are required for your job, it's important to take proper care of them. That way, you'll ensure that the materials last a long time, thus allowing you to be more successful and safe. Regular cleaning -- in the correct way -- is vital. To help you get started, here's our step-by-step guide for cleaning your combat desert boots.

    Step one: Buy a suede cleaning kit

    Although the nylon portions of your desert boots are enough to clean, the suede parts require extra care. Because suede is created from leather hide, it can be difficult to clean and can easily be damaged. You should not apply normal waterproofing products because these materials need to be able to breathe. Instead, a suede cleaning kit -- which usually contains a bristle brush, boot cleaner, and a special type of conditioner or preservative -- will cover all your bases.

    Step two: Regular, preventative cleaning

    You should make an effort to prevent permanent stains and signs of wear by cleaning your army authorized boots on a regular basis. Aim for several times a week, if not on a daily basis. Use the bristle brush or a soft cloth to brush off dirt and dust. You can also use a toothbrush for cleaning those hard-to-reach areas around the sole tread or shoelace eyelets.

    Step three: Take action for big stains

    Although your tactical boots are made to be water resistant, they can still become damp due to excess water or sweat. And if you work in a very active job, one foot can perspire up to 200 ml of moisture every day! That's why it's important to let your boots air dry. Don't put them in the sun or on heating vents, as this can warp the material. If your boots get stained with mud, let the mud dry completely before scrubbing off with a large brush. For any remaining stains, mix a little dishwashing soap with warm water and use a cloth or sponge to wipe it away. Refrain from using alcohol- or oil-based cleaners. If your boots get an oil stain, use a little bit of baking soda, baby powder, or corn starch to absorb it for a half hour before brushing it away.

    Step four: Don't ignore the inside

    You need to pay attention to more than just the outside of your boots. Be sure to keep the interior portions clean, too! You can remove wet insoles and let them air dry. If they need to be washed, don't put them in the washing machine. Hand wash with gentle soap, instead. You may also want to wash your shoelaces the same way. Then, you can use a cloth and a mixture of dishwashing soap and warm water to wipe the inside of the boots, followed by another wipe down with just water. Then, allow the boots to air dry.

    Proper boot care is vital for gear life as well as job performance. We hope this guide will help you care for your desert boots. If you are in need of desert combat boots -- or virtually any other type of work boots -- please contact us today for more information or take a look at the huge selection we offer on our website.

  • Steel Vs. Composite Toe: Which Work Boots Are Right For You?

    Composite Toe BootsOne of the problems with work boots is that there are so many different types. Although having a wide selection isn't usually considered to be a bad thing, it can make your decision more difficult. When you're trying to figure out the best type of heavy duty work boots for you, you need to consider both your industry and the typical job site you work on.

    Of course, at the end of the day, it's important to have comfortable work boots that provide protection for your feet. All boots should have ample toe room, which is about 12.5 mm from the front of the shoe. But when it comes down to it, you often have to make a determination between two main options: composite toe vs. steel toe boots. In order to help you decide, we've listed the pros and cons for both:

    Composite toe boots

    Composite toe boots pass all safety standards and offer a reasonable level of foot protection. They're made from non-metals like kevlar or plastics.

    Pros: They're lighter than steel toe boots and much better for extreme temperatures.

    Cons: Composite toe boots aren't as durable. They won't protect your feet as well as some of the best steel toe work boots because they can't handle as big an impact.

    Steel toe boots

    These work boots are considered to be a classic by many. They get their name from the toe-box that's made from heavy-duty steel.

    Pros: They provide the best protection. Full stop. They'll keep your feet safe from equipment like chainsaws or from anything that should fall from a great height.

    Cons: They're generally more expensive. They are also heavier, and some may find them to be less comfortable than other types of work boots. They'll also set off metal detectors, which can be a hassle.

    Generally speaking, if you're looking to get the best possible protection money can buy, go for boots with a steel toe. They're better for more hazardous sites. But if you need to be a bit lighter on your feet and don't need to be as concerned with falling objects -- or you're working in an extremely hot or cold climate -- composite might be a better choice.

    For all of your work boot needs, we're here to help. We have a huge selection of tactical and construction boots to suit all of your needs and to protect your feet in the toughest environments. Take a look around our site or contact us today for more information.

  • How to Break In Your Military Combat Boots

    hobnail bootsIn order to adequately protect our country, you need to have the proper protective gear for yourself. That's why it's so important that your military combat boots are comfortable. In order to do your job properly, the 26 bones, 19 muscles, and 107 ligaments in each foot need to be able to do theirs.

    Although our comfortable boots are ideal for difficult working conditions, you may still need to take a few steps to ensure they are molded to your body. Breaking in your hobnail boots can help to protect your feet before you get to work. Here are the top two methods for breaking in your tactical boots:

    Use water

    This is one of the quickest and easiest ways to make your boots feel like they were custom-made for your feet. Put your work boots in the tub and fill them with water. Make sure they're completely soaked through. Then, put on two pairs of socks (use socks that are not made of cotton or wool), empty the water from inside the boots, and then put them on. Wear them around for the rest of the day. If possible, go for a long walk. After wearing them for the day, take them off, pull out the insoles, and place the boots in front of a fan to dry (usually overnight). You may need to repeat this process a couple more times before you notice a difference, but you'll soon have comfortable tactical boots in no time.

    Go dry

    If you're not a fan of the wet method, you can opt for a dry version instead. This can be helpful if your military combat boots require a high-gloss shine or if outdoor conditions are freezing and snowy. Opting for the dry method will take longer, but it works on all types of boots -- military, police, or hobnail boots -- and in any conditions. Like the wet method, you'll want to wear two pairs of socks to reduce your risk for blisters. You'll have to wear your boots constantly for about a week. Be as active as possible during this week. Hiking, jogging, and climbing stairs are all ideal activities. With either method, be sure to inspect your feet for signs of blistering or athlete's foot. Although blisters will still probably occur during this phase, it's better to shape the boots to your feet now before getting out in the field.

    Breaking in your military hobnail boots or combat boots can help to keep your feet pain-free. Let us help you do your job better with our comfortable work boots. To find out more, contact us today.

  • 7 Tips To Survive Black Friday

    Here is a quick list to help you survive the madness that is Black Friday.

    1. Do your research 

    If you’re the kind of person who can drag yourself out of bed at 4 A.M. to get a good deal, you can do the legwork beforehand. Check to see if you’re really getting a good deal. Some stores mark up their items before they mark them down. Find out how much the item usually is, what it usually goes on sale for, and it’s Black Friday price. Make sure it’s worth it! Use price comparison sites like Google Shopping, Pricegrabber.com, and Shopping.com to see who is offering the best deal.

    2. Use the internet

    It’s not just for arguing about politics! Use the Internet to help you save money. Follow your favorite stores on social media—Facebook, Twitter, Instagram, Pinterest, etc.—and sign up for their online newsletters to be one of the first people to know about a sale.

    3. Make a plan

    Find out when each store you’re going to visit opens and plan accordingly. Make brands and stores that rarely offer discounts a priority over places that have sales all the time.

    4. Get there early  

    This is common sense. You know what they say: “The early bird gets the deeply discounted television.” Or something like that.

    5. Bring provisions 

    Don’t waste your time in line for food or drinks. Bring some snacks and a few water bottles.

    6. Have back-up plans 

    You might not get a deal that you really wanted. That’s okay. You might unexpectedly find something even better.

    7. Be civil

    You don’t want to be on the 10 o’clock news for pushing a little girl. Treat each other with kindness. No object is worth putting yourself or others in danger.

    Brought to you by Hayley Nielsen, a Hi-Tec and Magnum blogger.

  • The 4 Most Underestimated Safety Hazards For Police Officers

    law enforcement boots

    If you or someone you love works as a police officer, your biggest fear probably relates to sustaining an injury or being killed while pursuing a perpetrator. Though these fears are founded, when it comes to personal safety, officers of the law need to worry about much more than criminal violence and friendly fire. The truth is that our men and women in blue face all sorts of safety hazards that may surprise you. Here are four of the most underestimated ones to watch out for:

    1. Lack of sleep

      Long and irregular work shifts can easily result in lack of sleep. Shift work sleep disorder (or SWSD) is one of the most underrated hazards for police officers, but its effects can be catastrophic. You might think a little sleepiness is nothing to worry about, but once the circadian rhythm is compromised, a law enforcement officer may suffer from insomnia during his or her prime daytime sleep opportunities. Thus, he or she will not be able to perform work duties well at night and will be at an increased risk for accidents and injuries.

    2. Psychological stress

      The stress brought on by the job can be very serious for countless officers. They can experience anything from family and relationship problems and added strain to severe conditions like PTSD. These can often lead to long term emotional issues or substance abuse. Without therapy and treatment, these conditions can turn an otherwise capable officer into a potential liability.

    3. Environmental factors

      Having to spend long hours in difficult outdoor conditions can take its toll on even the most capable of officers. Extreme temperatures or prolonged exposure to sunlight, snow, rain, or wind can result in dehydration, hypothermia, heat stroke, or lengthy illnesses. Officers who fail to use proper protective gear like waterproof boots during adverse conditions may also sustain injuries or painful conditions.

    4. Long-term physical damage

      Accidents may pose a more immediate threat, but officers are prone to gradual physical damage due to everyday tasks. Long hours in a vehicle can lead to lower back pain. Neglecting to wear law enforcement boots during lengthy foot patrol assignments can easily lead to extremity pain. Police footwear and other gear can help to protect your feet and body from both immediate and gradual injury, but staying in shape and taking breaks from the physical demands of the job are also important for overall health. An average of $70 per employee is spent on foot protection every year, but it's important for departments to invest in high-quality police boots and protective gear to ensure officers can have a long, productive career.

    Although not all police-related injuries and accidents can be prevented, it's important to recognize these surprising risk factors to prepare and protect whenever possible. One way to do that is by investing in proper law enforcement boots to keep your feet safe. To find out more about the types of law enforcement boots and other types of comfortable work boots we have in stock, take a look around our website or contact us for further information.

  • Avoid These 5 Common Foot Problems With Well-Fitting Work Boots

    comfortable work boots

    Here's a hard truth: most of us aren't wearing supportive or protective footwear. Though doing so is important for maintaining foot health across the board, it's especially imperative for those who rely on their foot strength and physical stamina on a daily basis to do their jobs. The average Joe and Jane needs his or her feet to walk the average 10,000 or so steps every day, but the typical construction worker, who may walk more than 30,000 steps each day, requires work boots that support and protect the feet no matter what.

    If that worker fails to invest in comfortable work boots on the job, he or she could easily develop one of these five common foot problems:

    1. Bunions
      Genetic factors may play a role in bunion development, but they can also appear or be made worse by wearing shoes or boots that are too tight. If you wear ill-fitting boots over and over again, you may develop this condition, which causes a bony protrusion at the base of the big toe. Some bunions may be treated by applying ice, wearing a spacer, taping the toe, or wearing shoes that have a wider toe box. However, some bunions may not be helped by these measures and may require surgery instead. Many bunions can be avoided altogether by investing in high-quality, comfortable boots and shoes that provide support and protection.
    2. Corns
      Corns and callouses form when uncomfortable shoes put repetitive pressure on certain areas of the feet. Because they can form between toes or in other sensitive areas, they can cause a lot of pain. Usually, treatment involves wearing a pad over the area to relieve the pressure. But in order to avoid them in the first place, you should ensure your footwear fits properly and has ample room at the toe (for boots, there should be an approximate 12.55 mm space at the front).
    3. Ingrown toenails
      Ingrown toenails can form when the big toenail is cut too short, but this condition can be exacerbated by shoes and boots that are too tight a squeeze at the front. Wearing shoes that don't fit properly causes your big toe and second toe to press together in an unusual way, which can lead to inflammation and pain. To avoid this, trim your toenails straight across and wear shoes that have a wider toe box. If you have an ingrown toenail, you can soak it three to four times a day in warm water. In very rare cases, ingrown toenails may require surgery.
    4. Nerve issues
      Tight shoes can cause neuroma pain and other nerve problems. Though neuroma is a benign growth of nerve tissue, it can cause pain, numbness, and burning sensations. The pain can radiate from the ball of the foot all the way up to the toes. Neuromas can often occur in specific toes and usually require surgery. In order to avoid nerve irritation, always wear comfortable work boots that are specified to handle your job duties.
    5. Other pain
      In addition to these specific conditions, ill-fitting shoes can simply be uncomfortable and can cause pain through your feet, ankles, and other parts of your body. When your feet have to compensate for poor footwear, you can feel the strain throughout your other muscles. Plus, you may experience severe pain in your heels or the balls of your feet, which can make it nearly impossible to do your job. Don't add unnecessary muscular stress to your already demanding job. If you're experiencing mysterious muscle pain, your shoes may very well be the culprit.

    If you fail to protect your feet, you're taking a big risk. Though these conditions may start out as a minor annoyance, they can quickly disrupt your entire life and render you unable to do your job to the best of your ability. Don't discount the need for comfortable work boots. If you need police footwear, military combat boots, or the best steel toe boots for construction jobs, contact us today. Allow us help you do your job even better with our supportive and comfortable work boots.

  • Top 5 Safety Risks For Construction Workers

    comfortable bootsConstruction sites present countless potential risks for employees. In order to reduce the risk of accidents and injuries, both employers and workers have to be accountable for enforcing safety regulations. Not only do construction workers need to receive thorough training, but they also need to be able to recognize the most common hazards to promote safety for everyone on-site. Although there are many other types of safety risks involved with construction work, we've compiled five of the most common dangers that occur on job sites.

    1. Noise
      You might not realize that construction workers have a particular risk factor for significant hearing loss and noise-related injuries. Excessive, constant, and loud noise can cause hearing damage. This damage and noise can cause workers to not be aware of other risks on-site, thus causing other accidents. Simple ear plugs are not sufficient protection. Your employer is required to carry out a noise risk assessment and provide personal protective equipment. If your employer has not been compliant, you should raise your concerns to your superior.
    2. Slips, trips, and falls
      Although slips, trips, and falls may not sound like serious incidents, they can potentially cause significant injury. In fact, of the 4,600 total fatal injuries that occurred in the workplace in 2012, 666 of them were directly associated with falls, slips, and trips. It's easy to see why many of these incidents occur on construction sites. There are always holes, scaffolding, debris, spills, and daily changes to the site that workers may not notice. Although not all of these accidents can be prevented, you can reduce your risk of injury by wearing well-fitting heavy duty work boots. Make sure laces are tied and that there are no loose or malfunctioning components that may cause you to trip. You should also walk your work site before beginning work each day to identify potential hazards and alert your coworkers when you spot a hazard.
    3. Working from height
      OSHA has strict standards for construction workers who perform their duties from certain heights. Falls from height are unfortunately frequent and often result in death. That's why it's so important to ensure your employer is following safety guidelines and that all workers are trained and have the equipment they need to do their job safely. Always work with caution and assess the risks prior to beginning work. If you know that your employer isn't following rigging or fall arrest procedures, speak up.
    4. Foot injury
      Did you know that of all the workers who suffered foot-related injuries on the job, only 23% were wearing safe and comfortable boots? In order to protect your feet and avoid the chance of sustaining a debilitating injury, you need to wear protective, comfortable boots that are neither too tight or too loose. You'll probably want to consider investing in steel toe boots or waterproof boots, depending on the type of work you're doing. Even a small injury like a broken toe can keep you off your feet and out of work for a long time, so be sure to wear comfortable boots that follow all safety recommendations. You never know when you'll drop some materials or a piece of equipment might malfunction, and you don't want to risk an injury because you didn't take care of your feet beforehand.
    5. Lifting and moving
      Both equipment and materials are always being transported from one area to another. Whether you're lifting these materials by hand or are using lifting equipment, employees need to be trained and declared competent. Risk levels may vary from site to site, but it's important all employees are on the same page and know how to lift and move safely. Records also need to be maintained for verification purposes.

    Once you are familiar with the potential risks your job site poses, you can take action to prevent accidents and injuries. One of the best ways to ensure you stay safe is by using proper safety equipment like hard hats, glasses, harnesses, and protective, comfortable boots. To find out more about the variety of comfortable work boots we offer, you can browse our website or get in touch with us directly. Our boots are an important component of keeping you on the job. Let us help you protect your feet.

  • 5 Top Tips For Construction Worker Safety

    best steel toe work bootsPersonal safety is paramount in any job, but it's especially true when you work in construction. Not only is construction safety the responsibility of your employer, but it also comes down to every member of the team making sure that safety measures are taken and enforced. Unfortunately, there are many reports of non-compliance and workers being put at risk due to lack of education and care. In order to reduce the likelihood of accidents and injuries, here are five safety tips to follow while on the job:

    1. Walk the site
      Before starting work for the day, you need to put on your work boots and thoroughly walk the job site. And yes, you need to do so every day. Conditions can change due to weather or human activity and you need to be aware of every potential hazard that could arise. By walking the site, you're keeping you and your fellow workers safe before commencing operations. It takes very little time and can prevent accidents before they happen.
    2. Have consistent training
      Before ever stepping on the site, every worker needs to be educated on proper safety measures and OSHA standards. New employees need a thorough training session on equipment operation, emergency plans, and important regulations that ensure the safety of the site. Even highly experienced workers have been known to be too lax about safety measures from time to time, so you need to make sure that everyone is on the same page and understands the importance of safety maintenance. You don't want to find out later on that your new coworker doesn't have the best steel toe work boots or that an accident occurred due to ignorance.
    3. Wear proper safety equipment
      Did you know that the Bureau of Labor Statistics found that 75% of foot-related injuries and accidents occurred when workers were not in compliance or wearing the right gear? Having and using safety gear properly is vital for keeping workers healthy and on the job. Different jobs will have specific requirements, and everyone on-site needs to know what they are and follow instructions. You must make sure that each worker is equipped with all the necessities like hard hats, safety glasses, harnesses, and the best steel toe work boots available. If you don't protect your feet, head, eyes, and the rest of your body, you may soon find yourself unable to work.
    4. Strengthen accountability
      When it comes to following safety measures, you'll want to stress the importance of accountability among your fellow workers. Failure to comply should have serious consequences. If you see that an employee has neglected to wear their heavy duty work boots or other safety gear or that your employer has failed to provide necessary safety equipment for a project, you need to report this to your superior. Workers will be more likely to follow the rules when they know that disciplinary actions are swift and carry serious ramifications. Encourage everyone to work as a team in order to keep everyone safe.
    5. Learn from mistakes
      As hard as we try, some accidents cannot be prevented. Even if workers wear protective and comfortable boots 100% of the time and safety regulations are followed, incidents may still occur. Hopefully, these incidents will not be serious in nature and won't result in anyone getting hurt. Safety infringements can not only cause accidents and injuries, but they also can lead to citations and hefty fines. No matter what, it's important that the team learns from past mistakes in order for them not to be repeated.

    Let us help you do your part to promote safety on your work site. We have the best steel toe work boots on the market that will help to protect your feet from injury. To find out more about the best steel toe work boots we offer, browse our website or get in touch with us today.

Items 17 to 24 of 45 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6